Telescoping arm for variable overlap and compact transport.
Total 32' 2" to 35' 2" cut width with 11' 2" wide front mower.
Central pivot point allows mowing unit to oscillate perpendicular to direction of travel.
Optional hydraulic folding of side covers on front mower.
When paired with a CLAAS AXION tractor, the full width of the mowers is visible from the driver's seat.
With 39.4" of travel, the front mower stays on the ground at all times even in wavy terrain all independently of the tractor position.
Pivot point is near the cutting edge to keep knives out of the dirt and maintain integrety of stubble.
Hydraulic connections and ACTIVE FLOAT pressure gauge can be mounted on either side of the headstock for simple routing on various tractors.
Hydro-pneumatic suspension ensures even ground contact pressure in the full range of vertical movement and can be adjusted while moving through the field.
Easily visible gauge from driver's seat indicates correct tractor hitch height.
250 hour lubrication intervals for all universal joints minimize time not spent mowing.
Three options for crop conditioning, rubber roller, rubber-mounted tine, or no-conditioning.
Swath formation is adjustable across entire cut width.
Centrally located pivot points keep mowers close to the ground regardless of the tractor position.
Get to the field or on to the next task quickly with the compact A-frame and storage locations for hydraulic/electrical connectors and PTO.
Stamped and bolted cutterbar has precision ground drive gears, standard SAFETY LINK, replacable wear guards, and wave underside.
Mowers swivel 25 degress to the rear and 15 degrees upward when pre-set force is exceeded.
Mowers equipped with conditioners use belt and pulley system that absorbs load peaks while maintaining smooth power transmission.
Maximize time in the field and reduce maintenance time with quick change blades using the included tool.
Mowers are operated via either a simple control box, stand-alone terminal, or an existing ISOBUS display.